澳门现金娱乐网投

PreviousNext
  • 1
  • 2
  • 3
  • 4

Ford Medical Ambulance Inverter Location—Chengli Medical Rescue Vehicle Factory

  • Author: yangkai
  • Release time: 2017/12/20 11:39:23
  • News browsing popularity: Times
  • [This article tags]:

    就跟大家介绍一下, 程力医疗救援车厂家生产的医疗救护车逆变器位置,以及安装在此位置的好处。 Every day, many salesmen and users ask Jiangling Ford's medical ambulance inverter location. Today, manager Hu , a medical rescue vehicle manufacturer, will tell you about the location of the medical ambulance inverter produced by Chengli medical rescue vehicle manufacturer . And the benefits of installing in this location. Chengli Medical Rescue Depot has made more than 400 orders since it was opened. Each car must pass the quality inspection of our quality inspection department before leaving the factory. Every ambulance inverter produced by Chengli Medical Rescue Depot is It is placed in the back seat of the cab near the middle wall partition, an inverter, a secondary battery, a relay battery fuse box, a leakage switch, and the main part of the medical ambulance is the circuit. It is convenient to install these devices here. Used for future maintenance.


    JMC Ford New Transit Medical Ambulance Monitoring Configuration: Serial Number

    Body painting
    1 White body + red strong reflective tape and first aid emblem
    Alarm and lighting system
    2 LED long-exposure flashing warning light on the front of the roof with 100W siren
    3 LED square lights inside the medical cabin
    Central Power Distribution System
    4 1000W Sine wave inverter
    5 AC and DC (220V) power socket set
    6 Electrical equipment centralized control device
    7 Automotive low-voltage wiring harness: in line with national automotive industry standards QC / T 29106-2004
    8 Electric control box: The module is designed to facilitate maintenance and is equipped with a leakage and short-circuit protector at the 220V power output.
    Medical cabin configuration
    9 Ultraviolet light sterilization lamp (After stopping and turning off, first press the green power switch of the sterilization lamp, and then press the red start switch. The sterilization lamp will work after a delay of 1 minute and automatically turn off after 30 minutes.)
    10 Independent cabin heating and cooling system
    11 medical cabin top infusion rack
    12 Cab and medical cabin wall: with sliding window
    13 Nursing chair in front of medical cabin
    14 Long medical equipment cabinet on the left side of the medical cabin: First-aid equipment can be fixed on the countertop. There are machine glass sliding windows below.
    15 Long seat on the right side of the medical cabin: with comfortable back, soft cushions and 3 sets of seat belts, with armrests on both sides.
    16 oxygen tank fixtures on the left side of the medical cabin and 2 10-liter oxygen cylinders
    17 Medical cabin floor: acid resistance, alkali resistance, fire resistance, non-slip, anti-static
    18 2KG fire extinguisher
    Special equipment
    19 Automatic stretcher
    20 Automatic loading stretcher baffle and floor
    21 shovel stretcher
    22 Trash Can
    23 Medical equipment straps
    Optional configuration
    24 nursing chair in front of medical cabin


    Chengli Medical Rescue Vehicle Manufacturer Sales Hotline: 138-8688-8506 Manager Hu

    0

    Hubei Public Security No. 42130202003227